|
|
Location: Home / DIY tools / Battery Chargers / Uniross Universal Li-Ion Battery Charger -
Uniross Universal Li-Ion Battery Charger -
The Uniross Universal Li-Ion Charger (U0170895) is a true universal battery charger, suitable for di
|
| | | |  | $52.79 Universal Smart TLP-2000 Charger for Li-Ion/Polymer battery Pack (3.7V - 14.8V 1-4 cells) with Lipo Pack Balancer 
Smart universal charger for Li-Ion and polymer Li-ion battery packwith capacity > 500mAh 4 Voltage selections at 3.6V, 7.2V, 10.8V and 14.4V Charges pack made of 1 to 4 cellsUniversal 100V - 240V AC input for worldwide powerusage 500 mA constant charging current.Automatic charging stop when battery packis fully charged ,or when each cell 's voltage reaches 4.2V peakLED indicationRedmeans In Charging and Greenmeans Full or open circuits With Tamiya Conncetor Weight4.5 ozDimension1.5 x 1 x 4Operation Select right voltage level for your pack. For 3.6/3.7V 1-cell pack, set switch button 4.2 position on the chargerFor 7.2/7.4V 2-cell pack, set switch button 8.4 position on the chargerFor 10.8/11.1V 3-cell pack, set switch button 12.6 position on the chargerFor 14.4/14.8V 4-cell pack, set switch button 16.8 position on the chargerWarningUse special caution when working with Li-ion / Li-polymer cells and packs, they are very sensitive to charging characteristics and may explode if mishandled. Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use. Put the batteries in fire-proofenvironment in chargingNever leave batteries unattended when chargingDo not put batteries on wood surface or carpet when chargingWe are not responsible for any damage caused by misusing or mishandling of Li-Ion / Li-Polymer batteries in charging We are not responsible for damage caused by other Li-ion batteries not supplied from us Do not make any changes to the charger, charger accessories or connectors, as this might cause electrical shortage, fire or over-heating during charging. We are not liable for the product if any changes are made to the charger, accessories or connectors. Ultra-Balancer is the simplest method of keeping your Lipo packs balanced.It can be used for packs up to 14.8 volts (4S). Works as a stand-alone balancer before charging or simultaneously with your charger doing it's balancing function at the same time that your pack is being charged.2.5mm spacing on pin connection allows over 90% of the packs in the market to be used without any adapter required.offer an adapter in the Accessories category to facilitate the balancing of Thunder Power packs.Connector has 0.100 in pin spacing with 0.025 square pins and fits Apogee and other brands. Pins should be in orderred, black, black and black with no gaps or missing pins in the sequence.Using Your New Balancer Low Voltage Check First connect the Balancer to the Li-ion/Li-Polymer pack. Connect the most negative connection on the battery to the most negative pin on the balancer. If all cells are 3.2 volts or more all LEDs will turn on and remain lit for 5 seconds. If you have a three cell pack the first three LED will turn on. If one cell is low and has less than 3.2 volts that LED will not turn on. This means that your battery pack has been discharged too far. DO NOT CHARGE FAST!! Set your charge rate between 0.1 amps and 0.2 amps and wait until the LEDs begin to blink again. This indicates that at least one cell has reached 3.7 volts or more. Disconnect balancer and then reconnect for another Low Voltage Test. Repeat as needed until all LEDs turn on for 5 seconds indicating that all cells have at least 3.2 volts. Then you can proceed to charge normally. Balancing While Charging Connect the balancer and wait for the low voltage check.If all cells show 3.2 volts you can proceed with a normal charge sequence. The LED lamps will remain off until one cell reaches a voltage of 3.7 volts. Then balancing will begin. By the time the charge is complete the pack should be balanced. If the cells blink at random the pack is closely balanced. If a few LEDs remain on all the time these cells have a higher voltage then the other cells and more balancing is needed. When the charge is almost complete all the LEDs will turn on. Balancing After Charging Connect the Balancer to the pack. The balancer will begin discharging every c All-Battery.com |
| |
|
| The Uniross Universal Li-Ion Charger (U0170895) is a true universal battery charger, suitable for digital cameras, mobile phones and camcorders. |
Where to Buy Online
Click on the shop name to visit their website and buy this product
(cheapest price in red).
(note: Please make sure you double check the product details on the shop's site BEFORE you order the
Uniross Universal Li-Ion Battery Charger - and also read our Accuracy of Product Information statement below.
)
|
This product was originally available from but may either be out of stock or no longer available. They may still have a similar product though.
Similar products may also be available from the following websites:
|
|
|
| | | | | Universal Smart TLP-2000 Charger for Li-Ion/Polymer battery Pack (3.7V - 14.8V 1-4 cells) with Lipo Pack Balancer
Smart universal charger for Li-Ion and polymer Li-ion battery packwith capacity > 500mAh 4 Voltage selections at 3.6V, 7.2V, 10.8V and 14.4V Charges pack made of 1 to 4 cellsUniversal 100V - 240V AC input for worldwide powerusage 500 mA constant charging current.Automatic charging stop when battery packis fully charged ,or when each cell 's voltage reaches 4.2V peakLED indicationRedmeans In Charging and Greenmeans Full or open circuits With Tamiya Conncetor Weight4.5 ozDimension1.5 x 1 x 4Operation Select right voltage level for your pack. For 3.6/3.7V 1-cell pack, set switch button 4.2 position on the chargerFor 7.2/7.4V 2-cell pack, set switch button 8.4 position on the chargerFor 10.8/11.1V 3-cell pack, set switch button 12.6 position on the chargerFor 14.4/14.8V 4-cell pack, set switch button 16.8 position on the chargerWarningUse special caution when working with Li-ion / Li-polymer cells and packs, they are very sensitive to charging characteristics and may explode if mishandled. Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use. Put the batteries in fire-proofenvironment in chargingNever leave batteries unattended when chargingDo not put batteries on wood surface or carpet when chargingWe are not responsible for any damage caused by misusing or mishandling of Li-Ion / Li-Polymer batteries in charging We are not responsible for damage caused by other Li-ion batteries not supplied from us Do not make any changes to the charger, charger accessories or connectors, as this might cause electrical shortage, fire or over-heating during charging. We are not liable for the product if any changes are made to the charger, accessories or connectors. Ultra-Balancer is the simplest method of keeping your Lipo packs balanced.It can be used for packs up to 14.8 volts (4S). Works as a stand-alone balancer before charging or simultaneously with your charger doing it's balancing function at the same time that your pack is being charged.2.5mm spacing on pin connection allows over 90% of the packs in the market to be used without any adapter required.offer an adapter in the Accessories category to facilitate the balancing of Thunder Power packs.Connector has 0.100 in pin spacing with 0.025 square pins and fits Apogee and other brands. Pins should be in orderred, black, black and black with no gaps or missing pins in the sequence.Using Your New Balancer Low Voltage Check First connect the Balancer to the Li-ion/Li-Polymer pack. Connect the most negative connection on the battery to the most negative pin on the balancer. If all cells are 3.2 volts or more all LEDs will turn on and remain lit for 5 seconds. If you have a three cell pack the first three LED will turn on. If one cell is low and has less than 3.2 volts that LED will not turn on. This means that your battery pack has been discharged too far. DO NOT CHARGE FAST!! Set your charge rate between 0.1 amps and 0.2 amps and wait until the LEDs begin to blink again. This indicates that at least one cell has reached 3.7 volts or more. Disconnect balancer and then reconnect for another Low Voltage Test. Repeat as needed until all LEDs turn on for 5 seconds indicating that all cells have at least 3.2 volts. Then you can proceed to charge normally. Balancing While Charging Connect the balancer and wait for the low voltage check.If all cells show 3.2 volts you can proceed with a normal charge sequence. The LED lamps will remain off until one cell reaches a voltage of 3.7 volts. Then balancing will begin. By the time the charge is complete the pack should be balanced. If the cells blink at random the pack is closely balanced. If a few LEDs remain on all the time these cells have a higher voltage then the other cells and more balancing is needed. When the charge is almost complete all the LEDs will turn on. Balancing After Charging Connect the Balancer to the pack. The balancer will begin discharging every c All-Battery.com |
| |
Newsletter
Join our
mailing list and be kept informed of product news and SPECIAL OFFERS.
|
|
|
|
Accuracy of Product Information
All product features, images, prices and other information published on our website have either been made accessible by suppliers or been gathered from public-domain sources. Advanced System Technologies Ltd. makes every effort to ensure all information on this website is as accurate and up to date as possible. However, Advanced System Technologies Ltd. cannot guarantee the reliability or the accuracy of the information contained within its pages. All the actions taken by the user of the website are the responsibility of the individual.
Copyright © 1999,2013 Advanced System Technologies Limited. All Rights
Reserved.
All information on this site is presented as a guide. Advanced System Technologies Ltd. accepts no responsibilty for the accuracy of any information contained on the pages within this site.
|
The CompareStorePrices.co.uk device is a registered trademark of Advanced System Technologies Limited.
All other trademarks and devices are the property of their respective owners.
|
Vouchers Feed
More Uniross Battery Chargers