|
|
Location: Home / Car Audio and In Car Entertainment / Car Accessories / Hammerite Waxoyl Rustproofing Clear 5L
Hammerite Waxoyl Rustproofing Clear 5L
Waxoyl Rust Proofing prolongs your vehicles life by protecting against rust and damp
|
| |  | $184.00 Master Oil, White- 5 L 
WOCA Master Oil - White (Formerly Trip Trap) may be used on all unfininshed, freshly sanded and newly laid wood floors in all wood species. To be used on untreated and lye primed wood such as interior wood floors, wood stairs, wood panels, and wood furniture. The WOCA Master Oil has excellent penetration properties and therefore ensures a hard-wearing, dirt and water resistant surface. The WOCA Master Oil Natural is mainly used on dark wood species and enhances the natural warm glow of the wood whereas light wood species are often finished with WOCA Master Oil White which maintains and protects the natural light colour.Coverage: 1 liter of oil for every 120 to 180 sq. ft. depending on the wood species.Preparation:The unfinished wood should be freshly sanded with grit 100-120. Clean the floor with WOCA Wood Cleaner mixed with 2 gallons of warm water + 6.4 oz. (just over 3/4 cup) of Wood Cleaner. Use the high quality WOCA Swep Mop, which has no loose ends. The wood floor must be completely dry and free from dirt and grease before the WOCA oil application. Recommended moisture maximum 12%. The oiling is made at minimum 18 degree C.Base Coat Work Instruction:* Shake WOCA Oil container well before and during use. Choose your starting area and pour oil into a paint tray. Apply the Master Oil with a (short-haired) 3/8 nap paint roller and extension pole. Roll the oil as if you are painting the floor. Continue to spread oil until you coat 200-250 sq. ft.. Let the oil sit for 5-10 minutes. This will allow the wood floor to absorb oil into the open pores. During this period, move oil around in the treated area as you notice dry spots. When finished, rest your roller in the paint tray or on the cardboard.? With a red 3M (or similar colorfast) pad under a 175 rpm buffer, wet buff the oiled area slowly for several minutes. This continues to force oil into open pores. Buff until floor is completely saturated with oil, which means that some excess oil must be visible on the surface when finished. Shut off the buffer in the wet area, remove the wet pad and place it on a piece of cardboard. ? With a squeegee, pull all of the oil off of the treated area and onto the next work area. Walk over the oiled floor and with lint free rags wipe up any standing oil. Wipe along walls, corners and door frames, even if no oil residue is visible. If you have beveled planks or cracks between planks, wipe these also if you see excess oil. To speed up removal of excess oil, consider placing a WOCA Polishing Cloth under a clean pad and use the buffer to remove any residue. ? Place a white 3M (or similar) pad under the buffer. Immediately after removing excess oil from the work area, polish the oiled floor. Make at least two slow passes over the area. Wipe up any oil spots that you see while polishing. When finished, the oiled area should have a silky appearance and no oil residue on top of the floor. If you walk on the oiled area after polishing, buff away your foot prints. ? Repeat the process until the floor is completed. After finishing a room, inspect the floor carefully. If necessary, polish the entire floor once more with a clean white pad. ? When using Master Oil Natural or White, allow the oil to pre-harden (dry enough to walk on without leaving foot prints ) for 5 to 6 hours before applying the top coat. When using Color Oil allow 5 to 6 hours when top coating with the same Color Oil or 20 to 24 hours when topcoating with Maintenance Oil Paste. High humidity and cool temperatures may increase the drying time. +To prevent ?bleed back?, wipe up oil between floor boards with gaps or bevels before polishing with the white pad. +If you must quit the oiling process, pick a logical place to stop. Tape off adjoining planks if necessary before oiling and wipe up any oil that may get on bare wood or you will get a ?shiny? spot when you continue the oiling. Never stop in the middle of a floor as you will get overlap marks with different sheen levels. +When polish 1-877-floorguy |
| | $119.99 Rustproofing and Undercoating System Eastwood 50369 ZP 
Complete Undercoat and Rust Prevention System won't let your classic rustPremium undercoating system comes with everything you needincluding the gun and wandsto help you completely protect your vehicle, outside and inside.Drill hole for access inside doors, sills, rocker panel (Unibit included)Insert wand to spray (gun, 3 wands and 2 tips included)Includes Rubberized Undercoating and Anti-RustIncludes rubberized undercoating,anti-rust, even the gun and wands Complete Rust Prevention Package includes the Undercoating Gun with 2 flexible 24 wands and two tips (straight and 90-degree) for applying undercoat and anti-rust in recessed areas also includes rigid 16 wand. The Unibit drills a 1/2-dia. hole so the wands can reach inside door and rocker panel areas where access holes don't exist. 25 Plugs seal any drilled holes. 1 quart of Heavy-Duty Anti-Rust coats internal surfaces, and the 1 quart of Rubberized Undercoating coats wheel wells, frames and floor pans.Gun can also be used to spray bedliners, sound-deadening material.Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada. 20441 Undercoating Gun (requires 40-60 psi 5-6 cfm) with 2 Flexible Wands29836 16 Rigid Wand16003B Unibit Drill Bit16017ZP Quart of Heavy-Duty Anti-Rust 16008ZP Quart of Rubberized Undercoating16004 Pack of 25 Plugs16003A Plastic Bottle 50369 ZP 50369 50369 50369ZP EAS50369ZP PROOFING UNDERCOAT UNDERCOATING RUST TREATMENT PREVENTION PROOF SHUTZ ZIEBART Eastwood.com |
|
|
| Waxoyl Rust Proofing prolongs your vehicles life by protecting against rust and damp |
Where to Buy Online
Click on the shop name to visit their website and buy this product
(cheapest price in red).
(note: Please make sure you double check the product details on the shop's site BEFORE you order the
Hammerite Waxoyl Rustproofing Clear 5L and also read our Accuracy of Product Information statement below.
)
|
|
| | | Master Oil, White- 5 L
WOCA Master Oil - White (Formerly Trip Trap) may be used on all unfininshed, freshly sanded and newly laid wood floors in all wood species. To be used on untreated and lye primed wood such as interior wood floors, wood stairs, wood panels, and wood furniture. The WOCA Master Oil has excellent penetration properties and therefore ensures a hard-wearing, dirt and water resistant surface. The WOCA Master Oil Natural is mainly used on dark wood species and enhances the natural warm glow of the wood whereas light wood species are often finished with WOCA Master Oil White which maintains and protects the natural light colour.Coverage: 1 liter of oil for every 120 to 180 sq. ft. depending on the wood species.Preparation:The unfinished wood should be freshly sanded with grit 100-120. Clean the floor with WOCA Wood Cleaner mixed with 2 gallons of warm water + 6.4 oz. (just over 3/4 cup) of Wood Cleaner. Use the high quality WOCA Swep Mop, which has no loose ends. The wood floor must be completely dry and free from dirt and grease before the WOCA oil application. Recommended moisture maximum 12%. The oiling is made at minimum 18 degree C.Base Coat Work Instruction:* Shake WOCA Oil container well before and during use. Choose your starting area and pour oil into a paint tray. Apply the Master Oil with a (short-haired) 3/8 nap paint roller and extension pole. Roll the oil as if you are painting the floor. Continue to spread oil until you coat 200-250 sq. ft.. Let the oil sit for 5-10 minutes. This will allow the wood floor to absorb oil into the open pores. During this period, move oil around in the treated area as you notice dry spots. When finished, rest your roller in the paint tray or on the cardboard.? With a red 3M (or similar colorfast) pad under a 175 rpm buffer, wet buff the oiled area slowly for several minutes. This continues to force oil into open pores. Buff until floor is completely saturated with oil, which means that some excess oil must be visible on the surface when finished. Shut off the buffer in the wet area, remove the wet pad and place it on a piece of cardboard. ? With a squeegee, pull all of the oil off of the treated area and onto the next work area. Walk over the oiled floor and with lint free rags wipe up any standing oil. Wipe along walls, corners and door frames, even if no oil residue is visible. If you have beveled planks or cracks between planks, wipe these also if you see excess oil. To speed up removal of excess oil, consider placing a WOCA Polishing Cloth under a clean pad and use the buffer to remove any residue. ? Place a white 3M (or similar) pad under the buffer. Immediately after removing excess oil from the work area, polish the oiled floor. Make at least two slow passes over the area. Wipe up any oil spots that you see while polishing. When finished, the oiled area should have a silky appearance and no oil residue on top of the floor. If you walk on the oiled area after polishing, buff away your foot prints. ? Repeat the process until the floor is completed. After finishing a room, inspect the floor carefully. If necessary, polish the entire floor once more with a clean white pad. ? When using Master Oil Natural or White, allow the oil to pre-harden (dry enough to walk on without leaving foot prints ) for 5 to 6 hours before applying the top coat. When using Color Oil allow 5 to 6 hours when top coating with the same Color Oil or 20 to 24 hours when topcoating with Maintenance Oil Paste. High humidity and cool temperatures may increase the drying time. +To prevent ?bleed back?, wipe up oil between floor boards with gaps or bevels before polishing with the white pad. +If you must quit the oiling process, pick a logical place to stop. Tape off adjoining planks if necessary before oiling and wipe up any oil that may get on bare wood or you will get a ?shiny? spot when you continue the oiling. Never stop in the middle of a floor as you will get overlap marks with different sheen levels. +When polish 1-877-floorguy |
| | Rustproofing and Undercoating System Eastwood 50369 ZP
Complete Undercoat and Rust Prevention System won't let your classic rustPremium undercoating system comes with everything you needincluding the gun and wandsto help you completely protect your vehicle, outside and inside.Drill hole for access inside doors, sills, rocker panel (Unibit included)Insert wand to spray (gun, 3 wands and 2 tips included)Includes Rubberized Undercoating and Anti-RustIncludes rubberized undercoating,anti-rust, even the gun and wands Complete Rust Prevention Package includes the Undercoating Gun with 2 flexible 24 wands and two tips (straight and 90-degree) for applying undercoat and anti-rust in recessed areas also includes rigid 16 wand. The Unibit drills a 1/2-dia. hole so the wands can reach inside door and rocker panel areas where access holes don't exist. 25 Plugs seal any drilled holes. 1 quart of Heavy-Duty Anti-Rust coats internal surfaces, and the 1 quart of Rubberized Undercoating coats wheel wells, frames and floor pans.Gun can also be used to spray bedliners, sound-deadening material.Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada. 20441 Undercoating Gun (requires 40-60 psi 5-6 cfm) with 2 Flexible Wands29836 16 Rigid Wand16003B Unibit Drill Bit16017ZP Quart of Heavy-Duty Anti-Rust 16008ZP Quart of Rubberized Undercoating16004 Pack of 25 Plugs16003A Plastic Bottle 50369 ZP 50369 50369 50369ZP EAS50369ZP PROOFING UNDERCOAT UNDERCOATING RUST TREATMENT PREVENTION PROOF SHUTZ ZIEBART Eastwood.com |
|
Newsletter
Join our
mailing list and be kept informed of product news and SPECIAL OFFERS.
|
|
|
|
Accuracy of Product Information
All product features, images, prices and other information published on our website have either been made accessible by suppliers or been gathered from public-domain sources. Advanced System Technologies Ltd. makes every effort to ensure all information on this website is as accurate and up to date as possible. However, Advanced System Technologies Ltd. cannot guarantee the reliability or the accuracy of the information contained within its pages. All the actions taken by the user of the website are the responsibility of the individual.
Copyright © 1999,2013 Advanced System Technologies Limited. All Rights
Reserved.
All information on this site is presented as a guide. Advanced System Technologies Ltd. accepts no responsibilty for the accuracy of any information contained on the pages within this site.
|
The CompareStorePrices.co.uk device is a registered trademark of Advanced System Technologies Limited.
All other trademarks and devices are the property of their respective owners.
|
Vouchers Feed
More Hammerite Car Accessories