|
|
Location: Home / DIY tools / Hand Tools / Silverline Tools Ltd Silverline 196613 Plasterboard Chamfer Plane
Silverline Tools Ltd Silverline 196613 Plasterboard Chamfer Plane
Chamfer plane uses standard utility knife blades. Helps to create strong, well fitting joints. (Barcode EAN = 5024763036514).
|
| |  | $161.99 SK Hand Tool (SK 6029) 29 Piece Punch and Chisel Set # 6029 
Also known as: SK 6029, SK6029, SKT-6029, SKT6029; Features and Benefits: Strength and precision Featuring 7 different types of punch and chisels for a variety of uses Packaged in a roll Made in the U.S.A. Lifetime warranty20 piece punch and chisel set is made in the U.S.A. and hot forged from alloy steel for maximum strength. Each punch is hardened and tempered for maximum durability, and each is individually black oxided, ground and polished to a smooth metallic shine and corrosion resistance. Flat chisels are designed and tempered to resist splitting and mushrooming. Set includes: pin punches - 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8; starter punches - 3/32, 1/8, 5/32, 3/16, 1/4, 5/16; center punches - 1/4, 5/16, 3/8, 1/2; flat chisels - 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8; cape chisels - 1/4, 5/16; half round nose chisel - 5/16; diamond point chisels - 5/16, 3/8. ToolTopia.com |
| | | $169.81 SK Hand Tools 4090 40-Piece 3/8-Inch Drive 6 Point Fractional/Metric High Visibility Impact Socket SuperSet 
Coated with a rust-preventative compound Laser engraved with extra-large markings for improved readability SureGrip design which drives the side of the fastener hex, not the corner Set includes both fractional and metric sockets Packaged in a molded plastic case40 piece set is made in the U.S.A., featuring the SK's High Visibility technology. These new SK sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120 degrees with extra-large markings for improved readability. All SK impact sockets feature the SureGrip® design which drives the side of the fastener hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. The nose-down design extends the taper as far as possible, for improved access over straight wall designs. This SuperSet® includes standard and deep sockets in both fractional and metric sizes. Set includes: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm and 19mm standard sockets; 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm and 19mm deep sockets. Packaged in a molded plastic case. Made in the U.S.A. Comes a lifetime warranty. Amazon |
|
|
Where to Buy Online
Click on the shop name to visit their website and buy this product
(cheapest price in red).
(note: Please make sure you double check the product details on the shop's site BEFORE you order the
Silverline Tools Ltd Silverline 196613 Plasterboard Chamfer Plane and also read our Accuracy of Product Information statement below.
)
|
|
| | | SK Hand Tool (SK 6029) 29 Piece Punch and Chisel Set # 6029
Also known as: SK 6029, SK6029, SKT-6029, SKT6029; Features and Benefits: Strength and precision Featuring 7 different types of punch and chisels for a variety of uses Packaged in a roll Made in the U.S.A. Lifetime warranty20 piece punch and chisel set is made in the U.S.A. and hot forged from alloy steel for maximum strength. Each punch is hardened and tempered for maximum durability, and each is individually black oxided, ground and polished to a smooth metallic shine and corrosion resistance. Flat chisels are designed and tempered to resist splitting and mushrooming. Set includes: pin punches - 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8; starter punches - 3/32, 1/8, 5/32, 3/16, 1/4, 5/16; center punches - 1/4, 5/16, 3/8, 1/2; flat chisels - 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8; cape chisels - 1/4, 5/16; half round nose chisel - 5/16; diamond point chisels - 5/16, 3/8. ToolTopia.com |
| | | SK Hand Tools 4090 40-Piece 3/8-Inch Drive 6 Point Fractional/Metric High Visibility Impact Socket SuperSet
Coated with a rust-preventative compound Laser engraved with extra-large markings for improved readability SureGrip design which drives the side of the fastener hex, not the corner Set includes both fractional and metric sockets Packaged in a molded plastic case40 piece set is made in the U.S.A., featuring the SK's High Visibility technology. These new SK sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors. In addition to the rust-preventative coating, the sockets are laser engraved every 120 degrees with extra-large markings for improved readability. All SK impact sockets feature the SureGrip® design which drives the side of the fastener hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. The nose-down design extends the taper as far as possible, for improved access over straight wall designs. This SuperSet® includes standard and deep sockets in both fractional and metric sizes. Set includes: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm and 19mm standard sockets; 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm and 19mm deep sockets. Packaged in a molded plastic case. Made in the U.S.A. Comes a lifetime warranty. Amazon |
|
Newsletter
Join our
mailing list and be kept informed of product news and SPECIAL OFFERS.
|
|
|
|
Accuracy of Product Information
All product features, images, prices and other information published on our website have either been made accessible by suppliers or been gathered from public-domain sources. Advanced System Technologies Ltd. makes every effort to ensure all information on this website is as accurate and up to date as possible. However, Advanced System Technologies Ltd. cannot guarantee the reliability or the accuracy of the information contained within its pages. All the actions taken by the user of the website are the responsibility of the individual.
Copyright © 1999,2013 Advanced System Technologies Limited. All Rights
Reserved.
All information on this site is presented as a guide. Advanced System Technologies Ltd. accepts no responsibilty for the accuracy of any information contained on the pages within this site.
|
The CompareStorePrices.co.uk device is a registered trademark of Advanced System Technologies Limited.
All other trademarks and devices are the property of their respective owners.
|
Vouchers Feed
More Silverline Tools Ltd Hand Tools